PETEX distance learning

Shopping Cart

Well Completion

After a well is drilled, there is still much that needs to be done before oil and gas can begin to flow to the surface.

In this module you will learn:
  • Basic steps of well completion
  • Considerations in well completion design
  • Common types of equipment and mechanisms used including:
    • Tubular goods
    • Packers sleeves
    • Production liners
    • Wellhead and trees
    • Subsurface safety valves
  • Common types of lower well completions:
    • Open hole
    • Cased and perforated
    • Open hole with liner
  • Perforating options
  • Considerations for lower completions at the sandface
  • Special completions:
    • Horizontal wells with multistage hydraulic fracturing
    • Wells with extended reach drilling
    • Intelligent completions
    • Multiple completions

The Well Completion module consists of the following:
  • Lesson 1—Well Completion Overview
  • Lesson 2—Well Completion Components
  • Lesson 3—Lower Completions
  • Lesson 4—Special Completions
  • Well Completion Glossary
  • Quiz
Well Completion Image

It should take you approximately 60 to 75 minutes to complete this module. A passing score earns you a Certification of Completion.

Recommended viewing resolution: 1280x1024

For multiple licenses or to use the Well Completion e-learning module in training, please contact us at 800.687.4132 or 512.471.5940 or by sending an email to

Catalog No. 93.M0110 - $95.00 for 12 months


Privacy information :: UT Accessibility :: © 2017 by Petroleum Extension (PETEX®) of The University of Texas at Austin. All rights reserved.
1 University Station, R8100, Austin, TX 78712-1100 | Telephone: 800-687-4132 | 512-471-5940 | Visit our Contact page | Contact the webmaster