PETEX distance learning

Shopping Cart

Well Service And Workover

It is not unusual for an existing well to require repairs or enhancements during the life of the well. In this module you will learn:
  • The difference between well service and workover operations
  • Types of well service equipment
  • Some types of problems, their causes, and typical well service and workover solutions to those problems including:
    • Equipment failure
    • Excessive water and gas production
    • Production of gas
    • Poor production flow rates
    • Depleted reservoirs

The Well Service and Workover module consists of the following:
  • Lesson 1—Overview
  • Lesson 2—Well Service and Workover Equipment
  • Lesson 3—Equipment Failure
  • Lesson 4—Excessive Water and Gas Production
  • Lesson 5—Production of Gas
  • Lesson 6—Poor Production Rates
  • Lesson 7—Depleted Reservoirs
  • Well Service and Workover glossary
  • Quiz

In order to successfully complete this module you will be required to:
  • Go through all the lessons in the module.
  • Complete the practice items.
  • Complete the module quiz with a passing grade of 70%. You will have 2 chances to complete the quiz. If you don't pass the quiz the first time, you will be able to take it again after 7 days.

Well Service and Workover
It should take you approximately 75 to 90 mintues to complete this module. A passing score earns you a Certification of Completion.

Recommended viewing resolution: 1280x1024

For multiple licenses or for use the Well Service and Workover e-learning module in training, please contact us at 800.687.4132 or 512.471.5940 or by sending an email to

Catalog No. 93.M0810 - $125.00 for 12 months


Privacy information :: UT Accessibility :: © 2017 by Petroleum Extension (PETEX®) of The University of Texas at Austin. All rights reserved.
1 University Station, R8100, Austin, TX 78712-1100 | Telephone: 800-687-4132 | 512-471-5940 | Visit our Contact page | Contact the webmaster